Our range of practical and versatile stainless steel modular components are ideal for creating custom protective screens. Suitable for reception areas, bars and restaurants looking for a modern solution.

Not only is it non-invasive, but the understated design won’t compromise your customers experience, whilst also reassuring and protecting both staff and customers when they return to work.

Our modular system includes various clamps to hold glass panes in place. When combined with toughened glass, you get high-quality and easy to clean protective screen suitable for a wide range of applications. Available in pre-fabricated post sizes 500mm, 600mm, 700mm, 800mm, 900mm and 1000mm - in-stock and ready to buy online.

We can also offer a full service, including design and final installation of your protective screen. For more info, check out our Services Page.

• Key Features

• Modern and understated look ideal for a high-end protective screening
• Fully tested system under BS6180 building regulations
• Satin finish - Easy to maintain and clean
• Available to buy online in pre-fabricated sizes.

To help businesses return to work safely while adapting and protecting against the threat of COVID-19, Gripple is now manufacturing cost-effective, easy to install Perspex safety screens and hanger kits.

• Designed to reduce installation times, and can be installed by one person
• Easy attachment to all ceiling structures, including suspended ceiling grids
• Quick and easy to retrofit to pre-existing ceilings and structures
• Lightweight, adjustable system means height and position of screens can be easily altered as required
• Discreet and aesthetically pleasing, Gripple kits do not detract from POS or product displays

• Kit includes:

• 1 x Perspex safety screen

• Standard size - 900 mm x 500 mm (3mm thick)
• 2 x 6 mm holes pre-drilled at 450 mm centres
• Rounded corners for safety

• 2 x InvisiGrip Suspension Kits

• With your choice of standard end fixings (see below) and required length of transparent monofilament

The GM PICO® Protective Glass Screen is a portable, elegantly designed glass protective screen with high quality construction. It offers a hygienic and easy to clean surface which is highly resistant to chemical cleaners.

The protective glass screen is to be used exclusively for virus protection and is to be placed on a flat, horizontal, smooth desk or table so that it is not subjected to any other forces. This includes jolts or knocks and also introduced forces (tipping over the edge or corner) and all other forces which cause stresses within the glass (weight: approx. 20 kg).

• Available in Two variants

• High: 681 × 300 × 1000mm (with service hatch)

6mm Toughened Safety Glass

Typical applications: Retail, banks, pharmacies, petrol stations, tobacconists and GP practices

• Wide: 1031 × 300 × 670mm (with document slot)

8mm Toughened Safety Glass

Typical applications: Law firms, notaries, architects, agencies and meeting rooms

Our range of versatile stainless steel Spigots are ideal for creating protective screens for a range of reception areas, bars and restaurants looking for a contemporary and minimal finish.

Not only is it non-invasive, but the understated design won’t compromise your customers experience, whilst also reassuring and protecting both staff and customers when they return to work.

Our spigot system includes various clamps to hold the panes in place. When combined with toughened glass, you get high-quality protective screen suitable for a wide range of applications.

We offer a full list of services, including design and final installation of your protective screen. For more info, check out our Services Page.

• Key Features

• Modern and understated look ideal for a high-end protective screening
• Toughened glass
• Fully tested system under BS6180 building regulations
• Satin finish
• Easy to maintain and clean

OnLevel have created an aesthetically pleasing and diverse product which cannot only be used as a balustrade system, but also as a wind shield, protective screen or a room partition.

With a tested safety load of 1.5 kN/m, balustrade heights of up to 1297 mm are possible as fall protection. In cases of wind shields, without the need for fall protection, up to 2645 mm can be achieved.

The slim, elegant design and low-maintenance profiles are suitable for both interior and exterior applications. For glass thicknesses between 12 - 21.52 mm, and even has the options of a Stainless Steel Top Cover for the glass.

We offer a full list of services, including design and final installation of your protective screen. For more info, check out our Services Page.

• Key Features

• Modern and understated look ideal for a high-end protective screening
• Toughened glass
• Fully tested system under BS6180 building regulations
• Satin finish
• Easy to maintain and clean